Samsung Dishwasher Error Codes Flashing Lights Normal Heavy Smart Auto

According to Samsung official website, there are some models of dishwashers which do not have a digital display. So, if there is an error, these kinds of dishwashers will blink or flash lights. The code will be determined by the combination of blinking of flashing lights. You have to consider the blinking or flashing lights is an error code if your dishwasher does not work properly.

Now, what is the meaning of flashing lights of normal, heavy, smart auto in Samsung dishwasher? Let’s find the meaning of it and how to fix it here together with the other combination of the flashing lights.

Samsung Dishwasher Error Codes Flashing Lights Normal Heavy Smart Auto

Normal, Heavy and Smart Auto

What is the meaning of normal, heavy and smart auto? The meaning is that there is not enough water in the dishwasher. So, the solution that you are able to do to fix this issue is to empty the dishwasher. Then, you have to add detergent and run a normal cycle.

If you have tried the method above, but you find that the issue is still there, you are able to try to switch off power to the dishwasher at the circuit breaker and then you are able to visit the Support Center to get service.

Normal and Heavy

The meaning of this code is that the terminator is not operating correctly. You are able to access the Support Center to get service.

Normal and Quick

If you find Normal and Quick code, it means that the dishwasher is too hot. So, to fix this, you are able to empty the dishwasher and add detergent. After that, you are able to run a normal cycle. If you find that the error still happens, you are able to switch off power to the dishwasher at the circuit breaker and then access the Support Center to ask service.

Normal, Quick+, and Smart Auto

Do you find the Normal, quick+, and smart auto in your dishwasher? If so, the meaning is that the water is too hot. So, you have to verify that the hot water supply is not set above 176 degrees Fahrenheit. If after you check it and you find that it is not set above 176 degrees Fahrenheit, but you see that the error still happens, then you are able to access the Support Center to get help.

Normal and Smart Auto

The meaning of it is that the dishwasher is too hot. To fix this, you have to empty the dishwasher and add detergent. After that, you have to run a normal cycle. If you have tried to apply this method, but then you find that the error is still happening, you can try to switch off power to the dishwasher at the circuit breakers and then you can visit the Support Center to get help.

Normal

How about Normal? The meaning of Normal is that there is moisture which is detected by the dishwasher’s leak sensor. If you find that this code appears, the dishwasher actually will turn itself on and will not turn off. During this time, it will try to drain the water away.

However, if you find a leak, you can fix it by using the method from Samsung website.

    • You have to run a cycle to help find the source of the leak.
    • You have to check the water supply hose.
    • You must check the drain hose.
    • You have to check the rubber seal.
    • Make sure that you only use dishwasher detergent, not dish soap.
    • You have to level your dishwasher.
    • You have to verify that the sides of the tub are not bowed or stretched.
    • You have to check the water nozzles.
    • You have to set up service if these ways cannot fix it.

If you want to know the details of the methods above, you can access Samsung website in the Support.

However, if you find that there is not a leak, then you can do these things.

    • If the dishwasher was recently moved, there may be some water which splashed near the sensor. So, you are able to give it time to dry. If you think that the noise of the dishwasher is annoying, you are able to unplug it or turn it off at the circuit breaker.
    • If you have recently linked the dishwasher to a garbage disposal, you have to make sure that the garbage disposal cap is removed.
    • You need to make sure that the detergent dispenser has not been overfilled or extra detergent added outside of the dispenser.

Auto and Express 60

This code has the meaning that the panel detects a stuck button. To fix it, you can turn off the dishwasher and then touch every button on the panel. If you find that any buttons are not working what it should be, or you find that the error code returns after you turn the dishwasher back on, you can access Support Center to get help.

Auto and Heavy

What about Auto and Heavy code? The meaning of this code is that there is too much water in the dishwasher. It is usually related to a drain issue. So, here are the things that can be done by you.

    • You have to check the drain connection of the dishwasher at the sink.
    • You must check the drain hose.
    • You have to run water in the sink that the dishwasher is linked to.
    • Now, you can clean the drain, filter and sump in the tub.

Auto

This code has the meaning that the water pressure or temperature is not right. So, here are the things that can be done by you.

    • You have to verify the water pressure and temperature meets the water supply requirements.
    • The hoses of floodsafe are not suitable with Samsung dishwashers and should not be used.
    • You have to verify the water supply is turned on.

If the code is still appearing, you can access Support Center to get help.

Delicate

For this code, the meaning is that the dishwasher cannot drain. So, you have to inspect the drain connection of the dishwasher at the sink. Then, you must check the drain hose. After that, you have to run water in the sink that the dishwasher is linked to. And now, you can clean the drain, filter and sump in the tub.

Related Posts