The Vizio Smartcast offers a lot of methods to stream, control, and play your entertainment. However, the error known as Vizio Smartcast Not Available error often occurs, which is very annoying. Here is the simple guide to solve the issue called Vizio Smartcast Not Available in very simple steps.
- Check your internet connection
You can try to perform a speed test to see if you have a good internet connection. The network is also able to be improved by changing the position of the router or bypassing the router and connecting the Vizio Smartcast TV directly to the modem.
- Use another network
If checking your internet connection does not work, you can try to connect the Vizio Smartcast TV to a different network. If another network is available, you can use it. If not, then you can use the mobile hotspot instead. It is to make sure if the ISP is causing the error or not. Using a different ISP is good at identifying if the issue is with the network.
- Perform a power cycle
The issue related to the Vizio Smartcast could be the effect of a simple software glitch where it is able to be fixed by a simple power cycle. For those who have no idea about power cycling, it means completely restarting the module so all its temporary configurations get erased. It will re-initialize all the temporary settings when you turn it back on.
Power cycle the Smartcast TV and network devices can be used to erase the temporary configurations, that may be the culprit of the error. First of all, you can start by turning off the TV, modem, and router. Then, unplug these devices and wait for about a minute. In the next step, plug the modem in and wait for it to fully connect. Please do the same with the router. Now, it is time for you to plug in the Vizio Smartcast TV and turn it on. In the end, you can check if the issue is still there.
- Change the DHCP setting
If no one of the methods above worked, you can try too change the DHCP setting of the network. In this method, the different IP addresses will be assigned to all the devices, hence preventing the error. First, turn off the Vizio Smartcast TV. When you are on the computer, open any browser and type the URL of the router. Then, login using the username and password. When you are logged in, go to the Settings and find the DHCP setting located under the Advanced or Network settings. Please check if it is enabled. You will need to click enabled if it is disabled. On the other hand, if it is already enabled, please disable it first and then click enabled again. Finally, turn on the TV.
- Restart the TV
One of the easiest methods to fix many errors related to the Vizio Smartcast is to restart the TV. In order to do so, the first thing that you will need to do is too unplug the TV from the power source. Then, leave it unplugged for about five minutes. While it is still unplugged, you will need to press and hold the power button for a full one minute. After one minute has passed, please plug it in the power source. When it is done, turn on the TV. Once you have switched it on, you can use the menu on the remote to access the previous channels.
- Update the system firmware
There have been many updates of Vizio Smartcast in recent times. You will miss out the useful features and bug fixes if you do not update the system. Apart from that, updates will also solve the Vizio TV apps not showing issues. If you want to update the system firmware, first of all, you will have to turn on the TV and connect to a network. Then, go to the Settings. The next thing is to navigate to Systems. Please choose Check for System Updates. Do not forget to confirm that you want to check for updates. After that, start installing the updates. After the process of the installation is done, the TV will restart. When everything is done, you should now watch the content without errors.
- Factory reset the TV
The last solution to fix the error is to factory reset the Vizio Smartcast TV. Please be careful before doing this method as it will cause the settings, contents, and apps to be lost.
For those who want to factory reset the TV, firstly, press the Menu button on the Vizio TV remote. Then, highlight and choose the Reset & Admin option. Next, highlight and choose the Reset to the Factory Settings option. Another thing to highlight and to choose is the Reset option. Lastly, complete the First Time Setup of the TV.
In case the error still exists even after you have done factory reset, then you are recommended to contact Vizio Support for further help.
Smartcast refers to a capability the TV has using apps on the smartphone or tablet that are capable. If the smartcast app is downloaded on your smartphone or tablet, you will be able to see a list of programs that you are able to smartcast to the TV, such as Netflix, Youtube, Hulu and many more.
The software glitch or the non-optimal settings of the network may cause the Vizio Smartcast TV to stop working. Some different issues may be related to the Vizio Smartcast TV which may hinder its operations, ranging from the location you could not cast to the TV to the location you have stuck on just a black startup screen or the Vizio TV not loaded. Before trying any of the recommended methods, it is better for you to make sure that you have a working internet connection and try to verify that the device is working well.
On my daily job, I am a software engineer, programmer & computer technician. My passion is assembling PC hardware, studying Operating System and all things related to computers technology. I also love to make short films for YouTube as a producer. More at about me…