How to Reset Whirlpool Front Load Dryer

When you are in the middle of using your Whirlpool dryer, you might a PF error code, the one that indicates a recent power failure, needing the dryer to be reset and restarted. If you have no idea how to reset and restart it, you are on the right page as you will be informed how to do it here. Please read the following information well so that you will be able to successfully reset the Whirlpool front load dryer. Feel free to get a piece of paper just in case you need it.

In order to reset the front load dryer of Whirlpool, all that you have to do is to press the Start button. Please do it for a few seconds so that the dryer can be restarted. It should be working just like in some cases. In case the dryer does not restart automatically, you are suggested to choose a new cycle and any options. After that, do not forget to press the Start button to start the restarting process.

How to Reset Whirlpool Front Load Dryer

As you already find out the way to reset the Whirlpool front load dryer, you might also need to know some other things. Below are some questions related to Whirlpool dryer and the answers that you might want to check out:

    • Question: What should you do if you press the Start button on your Whirlpool dryer but nothing happens?
      Answer: There are a few possible reasons why your dryer will not start when you push the start button. Some of these possible reasons include a lack of power, a defective door switch, a blown thermal fuse or a bad start switch.  If it does not turn on, there is a high chance of it to have no power. In this case, you can check your power and the house circuit breaker.
    • Question: Does Whirlpool have a reset button?
      Answer: Unfortunately, there is no reset button on a Whirlpool, which is such a shame. However, some products really have specific error codes. Identifying them can be done easily from the user manual. If you fail to identify the error code, please start with the most basic step.
    • Question: What is the reason that makes your Whirlpool dryer not coming on?
      Answer: In some cases, the Whirlpool dryer is not coming on due to a power issue instead of a dryer malfunction. If it is the case, you will have to make sure that the dryer is correctly plugged into the proper electrical outlet. Do not forget to check for tripped breakers or blown fuses. If it is needed, you can also reset any tripped breakers and replace the blown fuses.
    • Question: What should you do to fix the control lock on your Whirlpool Duet dryer?
      Answer: If you want to fix the control lock on your Whirlpool duet dryer, you should press and hold the Control Lock button for a minimum of three seconds so that the control panel can be unlocked. After unlocking the control panel, you will be able to have full access to the dryer controls.
    • Question: Is it true that every tumble dryer has a reset button?
      Answer: For your information, not every tumble dryer has a reset button. Basically, if it stops heating, the high chance is due to the thermostat or TOC (Thermal Overload Cutout) has tripped due to overheating. Usually, thermostat’s are the size of a 5p and you are able to access it by removing the back panel.
    • Question: What should you do when the dryer will not start?
      Answer: If the dryer will not start, you have to unplug it and check the thermal fuse for continuity. If there is no continuity as measured by the multimeter, please replace the thermal fuse. Make sure to also check the exhaust vent because there is a high chance of a log in the vent to cause the thermal fuse to blow. If you have a dryer with a dial timer, a broken push to start switch can prevent the motor from running.
    • Question: What is the reason that makes your dryer suddenly stop working?
      Answer:  There are several things that are important for the function of the dryer, including heat and controlling heat. A dryer that stops working can be due to a faulty or broken thermostat. If you want to make the dryer to work again, you can try to replace the fuse of the thermostat. You can tell if there is an additional problem like improper ventilation when a blown thermal fuse from overheating.
    • Question: What should you do to clear a Whirlpool error code?
      Answer:  If you want to remove the code, you must press pause or cancel button twice and the power button once. If you can still see the code, it is time for you to unplug the washer or disconnect the power for a minute. During the Clean Washer cycle, items were detected in the washer. Please remove the items form the drum and then restart the Clean Washer cycle.
    • Question: Does a Whirlpool dryer have a fuse?
      Answer:  To find out if there is a fuse on a Whirlpool dryer, you will have to remove the back access panel on the dryer and then look for the exhaust duck located close to the bottom of the unit. Keep in mind that the thermal use is either circular or oblong. It is usually white plastic with the black material located in the center and two wire leads. As for the thermal fuse it is mounted on the exhaust duct.
    • Question: What should you do to tell if a thermal fuse is blown without a multimeter?
      Answer: In case there is no a multimeter, testing whether or not the fuse is working can be done by bypassing the fuse itself. All that you have to do to be able to do it is to simply detach the wires from the fuse, wire them together using a jumper wire and try to operate the dryer.

Related Posts