Almost every smartphone has a fingerprint feature, including a lot of Android phones. Fingerprint refers to a security feature that is embedded in many Android phones. The main goal is to make the data security more secure so that it can only be accessed by the owners of the phone.
While the fingerprint feature is great, especially for security purposes, sometimes there is an issue with it. One of the most common issues is that the fingerprint sensor does not respond quickly. As one of the Android users, it is important for you to know ways to make the Android fingerprint sensor faster and more accurate, especially when the biometric-based security sensor does not respond quickly.
Because the accuracy of the fingerprints is very slow, sometimes the users have to scan their fingerprints many times. It has been known that the responsiveness of the fingerprint sensor in various smartphone classes is different. Sometimes, the fingerprints on low budget phones are not faster or slower compared to high budget ones. The reason is because the higher the class of the phone, the better the fingerprint sensor.
Then, what should you do when dealing with the fingerprint sensor on an Android that is slow? If you are in this kind of situation, gladly you come here where you will be able to find 7 tips to make Android fingerprints work quickly and accurately. All these tips below are recommended by Telset.id.
1. Make sure your hands are always clean
It will be easier for the fingerprint sensors on the phone to read your fingerprints if your fingers are clean. Dirty or greasy fingers can make the fingerprint sensor unresponsive. So, make sure to make sure your finger is clean before touching the sensor. If the fingers are dirty, not only will the fingerprints be hard to read, but it can also reduce the ability of the fingerprints to read fingerprints. In the worst case, it can be damaged.
2. Clean the fingerprint sensor
A thing that usually makes the fingerprint feature on the Android fail to scan is usually the cleanliness of the sensor. Dust or stains on the surface of the fingerprint can make the fingerprint sensor not respond optimally. It especially happens to lower middle class phones that still use the fingerprint module on the outside, causing dust and dirt to stick to the sensor. Besides, the frequent use of the phone can also cause dust and dirt to stick to the sensor.
If you want to make the fingerprint sensor on an Android fast and accurate, you have to clean the fingerprint. You can do it using alcohol and a cotton bud. By doing so, the dirt that usually sticks to the corners will usually be removed.
3. Register multiple fingerprints
The condition of the finger can affect the process of fingerprints on the phone. If the fingerprint has scratches due to an accident or is dirty, the fingerprint sensor will not respond. This kind of thing is usually experienced by phone users, disrupting the scanning process of the fingerprint. In this case, you will have to register multiple fingers to unlock using the fingerprint sensor. By registering multiple fingerprints, you do not rely on one finger to unlock your fingerprints. It means you can use other fingers to unlock the phone.
4. Register the same finger 2 or more times
The accuracy of the fingerprint often decreases as the phone ages. It results in the fingerprint sensor not responding optimally. To make the fingerprint sensor on an Android faster and more accurate, it is to register the same fingerprint several times. For instance, you are used to opening your phone using your forefinger, then registering your fingerprints up to 2 times or more. By doing so, the fingerprint sensor will recognize it more easily. Registering the same finger 2 or more times will increase the ability and accuracy of the sensor when reading the surface of the fingerprint.
5. Restart the smartphone
As a technological device, sometimes, the performance of the phone decreases, which affects some features, including the fingerprint feature. If this feature gets damaged, it will be hard for you to open the phone because the fingerprint cannot be read on the fingerprint feature.
In order to fix the issue, you have to restart the phone. After restarting, please wait a few moments and scan the fingerprint again.
6. Update the software of the smartphone
If the fingerprint of your phone is still incorrect even after cleaning your fingerprints, cleaning the surface of the fingerprint and restarting the phone, another reason that could happen is because you have not updated the software.
Apparently, regular smartphone software updates can maintain the quality of the phone’s performance. Sadly, users often ignore software updates because they take a lot of data. It is the reason why you have to update the software regularly. After updating the device, make sure to do scanning and the fingerprint of the phone will go back to normal.
7. Visit the Service Center
The last tip for dealing with the fingerprint sensor not responding is to visit the official service center. There might be a serious issue that occurs on the phone, such as a bug or hardware damage that is not easy to fix.
If you want to visit the service center, make sure to bring your phone and identity ID along with you. When you are there, tell them the issue that is currently happening to the technician team. In the end, they will examine the reasons why the fingerprint sensor is unable to respond.
These are the ways to make the Android fingerprints faster and not slow. Make sure to try these methods.
On my daily job, I am a software engineer, programmer & computer technician. My passion is assembling PC hardware, studying Operating System and all things related to computers technology. I also love to make short films for YouTube as a producer. More at about me…
Leave a Reply